DIY Projects, Geek Stuff, Inspired By Pinterest, Inspired by Pinterest

    GEEKIFIED: DIY Space Invader Magnets!

    Inspired by pinterest (1)

    Here’s another GEEKIFIED project from Pinterest. We’re making Space Invader Magnets based off a project on Pinterest! The original are these DIY Famingo Pushipins on Tell Love and Party, and GEEKIFIED are these Space Invader Magnets  from yours truly.

     Space Invader Magnets

    Read on for more!!

    So, I found these DIY Famingo Pushipins on Tell Love and Party, and thought they were amazing.

    DIY Flamingo Push Pins – Tell Love and Party

    Seriously – how cute??

    But, they gave me a bigger idea – I can use this method for SO MANY THINGS!! Even cosplay!

    So, the first thing I did to test this method was to make little magnets. Now that I have my own space in my office, I like to decorate. I’ll be taking these little babies to works.

    Here are the instructions!

    First, everything you need is here.

    It’s essentially a silicone mold (I used THIS ice cube tray from Fred & Friends), a hot glue gun and glue sticks, some magnets, paint and a paintbrush. Easy peasy. People still say this right?

     Materials Needed

    From there, it’s even simpler. You fill the mold with hot glue using a hot glue gun. I’ve found it’s best to fill these intricate molds by letting your gun heat up fully, and then squeezing a thin, complete layer at the bottom, so you can get all the details. After that, you should be able to go slowly and fill up the rest (going slow will prevent air bubbles), going in layers.

    Once you reach towards the top, but not quite, let it harden up a bit, so you have a place to rest the magnet, and fill around. If you overfill a little, it’s easy to trim off a bit, as shown. Then drop the magnet in and let it dry more.

     Hot Glue in molds, then add magnet

    After that, let them solidify (I left mine in the mold for 20 minutes), and then pop them out and paint them. I didn’t use a primer, but I did use 2 coats of paint.

     Close up of front

    VOILA! You’re all set.

     Finished magnets

    Cosplay, Geek Stuff, Knowledge, Random

    Cosplay Tips – Makeup Brushes

    When we think of cosplay tools, I’m sure a heat gun or knife kit probably comes to mind first.

    However, there are other tools that you can use to bump your cosplay up to the next level.

    For me, one group is makeup brushes.

    Don’t run away yet, lemme explain.

    As you may know, I’m a big proponent of wearing makeup for cosplay. I seriously believe it can make all the difference for your cosplay – in between how you appear to others, how you appear in photographs, and how you can match your character better. Make-up is AMAZING for that. Even male cosplayers, who often growl at me at the suggestion, should wear makeup. It takes you to the next level, the same way a wig does! Get over your fear.

    So, part of applying makeup is brushes.

    You don’t need to spend $100s of your hard-earned cash to escalate your look. Lemme tell you that much right here.

    I own cheap brushes. Like $10 for 12 brushes cheap.

    But they work amazingly well- because I’ve learned how to care for cheap brushes.

    Firstly, let me show you the brushes I own:

    Here are my exact set from Amazon. I am not an Amazon Affiliate, I do not get kick-backs- I’m just genuinely admitting that these are the ones I own, and I like them.

    Here’s the deal. These range from $10-14 USD. I bought them at $12. They’re cheap. I know it.
    But, if you know how to handle cheap brushes, you’ll love them.

    Here’s my ‘new owner’ process for cheap brushes.

    1) Remove the handles. They’re wimpy at first, for real- the glue is weak, and they won’t stick on. After a few washes, the handles will fall off, so it’s better to start off right. Remove those handles first thing.

    2) Wash the brushes. These smelled like …. something. I dunno what. But, I knew it would be best to wash them. So I did. My process for washing brushes is HERE.
    If you want the simple steps – Small bowl of warm water and dash of soap (baby shampoo, brush cleaner, etc. I use my plain clarifying Suave shampoo). Tap each brush in a few times, then remove and swirl on the palm of your hand. Then rinse thoroughly. I hang mine to dry, with the bristles facing down from a rack in my kitchen. When completely dry, swirl on your clean palm to fluff the brushes. Tadaaa.

    3) Using E6000 or a hot glue gun (I used the latter), glue the handles and brushed back together. If you have the same set as me, remember that the larger brushes are labeled, so you’ll want to match them up first.


    4) That’s it. Store them in something pretty, and repeat washings as necessary.


    Also, please don’t ignore washing your brushes. Leaving them dirty will essentially put dirt on your faces, and in your pores. No fun. Check out the difference between my dirty and clean brushes below, as well as my blenders! The first (white) one is a knock-off, and the hot pink one is the my Beautyblender from Birchbox that I got using some of my points last year.

    Before: IMG_9791

    AFTER! IMG_9794

    Here’s the name brand before and after. It expands, so it’s not a trick that it looks a little bigger inthe second picture.







    For me, this makes the brushes hold together way longer, and the initial wash softens and cleans them.

    As for using them with makeup, here’s a quick guide from Allure Magazine that explains the usage of each type of brush!

    You can also check out the search terms “Makeup Brush Guides” on Pinterest to find tons of useful guides, tutorials and tips!

    Again, I don’t get a kickback on anything. i’m just letting you know everything I know.

    Let me know if you have any questions! I’ll explain more about how I use my brushes later!

    Cosplay, DIY Projects, Knowledge, Make, Wear

    DIY Wig Detangling Spray

    I’ll be the first to admit that I don’t take care of my wigs as well as I should.
    I know that may not give me much credibility as a cosplay source, but I think it also adds credibility when I say that this easy, (sorta) 2-ingredient, DIY wig detangling spray actually works.

    I would know, because like I said, I don’t take care of my wigs very well initially, especially right after a con (when I’m too tired to do everything right). I’ll let them tangle up, lose their bags, forget to put them away- etc. You get the picture.

    But, this always means that I have to detangle them before I can use them again, and that’s how I know that this spray works.

    Plus, chances are, you already have the ingredients, and you may already use the spray in a soak form (if you’re like me and spend a lot of time on the internet).

    Also, I say sorta 2 because one ingredient that you add is already pre-mixed for you, but it itself contains many ingredients. You’ll see what I mean.

    So, one thing you need is a spray bottle (which I’m not counting as an ingredient). I’d recommend reusing an old bottle you have on hand, but only after you’ve cleaned it thoroughly.

    I end up reusing my NYX Setting Spray bottles for things like this – they’re tiny, so I can take them with me, and it means I don’t have to worry about harsh chemicals like if I were using a leftover cleaning spray bottle.

    The recipe itself?

    1 part fabric softener (liquid) to 3-5 parts water.
    That’s it. Mix and shake. Spray on wigs to coat the surface for easy detangling.

    I got this idea mostly because of the internet. It may have been done before, but I tried this on my own recently after C2E2, and a particularly nastily snarled, long wig after a long Saturday of use.

    Since I normally clean/condition my wigs by soaking them in fabric softener, I figured that should be the main, non-water ingredient in my detangling spray.

    I typically use this mixture, with softener replaced with hair conditioner, to detangle my own, real hair, but that doesn’t work as well on wigs (if they aren’t real hair – the synthetic fibers don’t hold the conditioner like real hair does, so especially you need the fabric softener to make your wig slippery), and the water prevents it from getting too greasy.

    Experiment until you find a ratio that you like. It’s your life. You have the power.

    With my short wigs, I’d water I use 1 part softener to 5 parts water, so that my wig doesn’t get too weighed down.
    On long wigs, when I really need that extra detangling power, I like to use 1 part softener to 3 parts water.

    Since I’m using old make-up bottles, I typically only make small amounts at a time, which really lets me customize the mixture often, and play around with the ratios.

    That being said, it also means I dunno about the staying-power of the mixture. I’m assuming it would keep for a long time, like fabric softener does, but I’ve just never found on my own. Lemme know, if you know.

    Also, let me know if this works for you, or if you have other suggestions! As we know, I’m an Open Book Cosplayer, which essentially means I’ll tell you anything and everything I know about cosplay if you ask. I’ve got nothing to hide, no secrets to keep, and I love spreading the knowledge wealth. This is how I detangle my wigs, and I find it works for me!

    Plus, I smell like clean laundry a lot.

    As a word of warning, try not to use too much, especially if you don’t rinse our your wigs. If you have sensitive skin, and you use this on the scalp of the wig, all of your sweat mixed with the softener could make you break out.
    It hasn’t happened to me, but it is something I just thought of while writing this out.

    I talk a lot! My bad.

    DIY Projects, Geek Stuff, Instagram, Make

    DIY X-Files Painting

    After a very long hiatus, I AM BACK.
    Sorry for the delay.

    Let’s jump right into it, shall we?

    Tomorrow is another Geek Girl Brunch in Chicago, and the theme is Reopening the X-Files.

    Needless to say, I’m absolutely stoked.

    In honor of the brunch subject, and my new found obsession with the X-Files, I made you a little tutorial for a painting of the iconic ‘I WANT TO BELIEVE’ poster from the show.

    It’s pretty easy to do, and I LOVE IT SO MUCH.

    Check it out, here’s the finished painting:

    So, gather your supplies.

    Starting to paint

    I used a large cheap canvas (Got it on sale from Michael’s for $5!!), some cheap acrylic paint ($0.66 each from Michael’s) in the colors Hunter Green, White, Black and Bright Blue (to get the various shades, just mix the colors with black or white, depending on the look you’re going for), some paintbrushes (about $0.20 each, but I bought a big variety pack), vinyl letter (I used 2 inch) and some water.

    So first, plan out your letters. I just drew some pen lines based on where I roughly though the letters belonged, based on my reference photo of the original poster.

    Add vinyl stickers

    Next, take the hunter green (or whatever bottom color you’ve chosen), and use it to lay the base layer of paint over the bottom 1/4 or 1/3 of the canvas. I used letters that didn’t stick very well, so my first layer is a little choppy looking, since I was trying to carefully paint over the letters. Once I did this, he letter stuck on the canvas, so I could use a rougher touch later (which is good, because I mixed hunter green and a little black together for the 2nd and third layers on the green parts).

    first layer of paint

    Next comes the sky. First, ‘paint’ the rest of the canvas with water. Not enough to soak it, but this will help us blend the sky paint.
    I mixed the bright blue paint with the white paint, not fully mixing the paint (it will look a little marbled – that’s the look I like). Slather it on the canvas, dipping your brush in a little water in you need it to smooth and blend it. It should look like a nice, smooth mix of shades of blue and white. niiiiiiice.

    finished sky and ground

    Now, add the rough shapes of the trees. I used the original poster as a reference for my shapes. Don’t worry about being perfect – you’ll paint over parts of them now, and fix the details later.

    rough shape of trees

    Add in some clouds. I basically started with plain white paint on a smaller brush and continually smushed it on the painting. Then, for the details, I made a little blue-gray paint by mixing white, black and blue- I used this as the darker parts of the clouds. Create whatever shades you want by changing the amounts of each color you use! This is your painting!

    add some clouds

    This next photos shows several steps.
    One was adding the bottom of the UFO, to gauge the placement and shape between the clouds.
    The other is that part I mentioned would happen a bit ago- slightly painting over the trees. In the original, there’s far off mountains/trees, that are shown by various shades of green/gray (depending on what version you look at). In my photo, I just show the random layers I made for those hills. The shades were created by mixing the hunter green with a little white, painting that layer of hills, and then mixing even more white, and then painting another layer on top. Does that make sense? I don’t communicate well. Just check the picture. Or as questions – I’m always here.

    start the UFO and clean up

    Next, paint the top of the UFO – I mixed black, white and green for a green/gray shade.
    I also re-detailed the trees here and blended the paint down the canvas again.

    re-detail trees

    Final details on the painting: for me, that’s some touches on the UFO, blending the bottom a bit more, and cleaning up the sky a bit. Use water if you want to re-blend.

    Almost Done!

    Now, WAIT UNTIL THE PAINTING IS COMPLETELY DRY. I just did some other stuff around the apartment for an hour, then came back. When the painting is dry, peel off your vinyl letters from the bottom of the painting.

    Before Clean Letters

    The letters may have gotten a little paint under them, so just freshen up the messy spots with some of the white paint.

    Clean Up Letters

    AND VOILA!!!
    You’ve got your own X-Files painting.
    Put it on display, boo. Be proud.
    I won’t lie, I was so happy, I kept giggling to myself. Alone. In my Apartment.
    Like a loser.

    Finished X-Files Painting

    But a really cool loser, you know?

    Adult Animation, Series Posts, Strong Women Series

    Strong Women Series: Linda Belcher (Bob’s Burgers)


    It’s a Wednesday, so I’ve got another strong woman for you to learn about. Today’s focus is on one of the most hilarious, animated “lean, mean, mom-jean, revenge machine’ ladies out there- the lovely Linda Belcher.

    Yesterday was my mom’s birthday, so what a better way to celebrate than honoring one of my (and my own mom’s) favorite TV moms? (Plus all the real birthday celebrating we actually did, ha).

    Let’s get into the reasons why I just seriously love Linda.

    [Image Credit]

    For one, she knows how to have fun.

    I’ve found in some TV shows that the ‘mom’ character is typically given less of a personality, and most of the action they have revolves around just being a mom- and I mean, don’t get me wrong; mom’s are amazing. But, I feel as though some writes lack giving depth to the mother figures, or stop their personalities beyond the hi-jinks of their family life.
    But Linda is her own woman, with her own desires, hobbies and skill sets- which I love.

    Episodes of Bob’s Burgers that focus on Linda are great because they focus on her as an individual… and it just so happens that that individual also has amazing taste.




    Hey guys-

    I know it’s been a while, but I’m going through a lot right now.

    I know you may not care, but let me explain anyways.

    These aren’t excuses for my lack of posting, just explanations.

    I’m in a weird place right now.
    As some of you know- I am a graduate student.

    Or, technically, I was.
    I graduated recently with my MBA, so I feel like my life has kind of turned around.
    Being a student was all I knew, and now I’m at a different point in my life.

    It’s scary; it’s exciting; it’s new.

    I have to find a job,
    I just moved to Chicago (before I was kind of near St. Louis),
    I just got back from a trip to NYC.

    I’m just going through a lot, haha.

    I promise I’ll be better, now that I’ve settled in.

    Hang in there please!

    Cosplay, Outfits, Wear

    My favorite casual cosplays! Part 1

    Casual cosplay is so fun.

    I was matched up with the lovely Linsdey at Co-Host Girlfriend for the current round of the Odd Honey Swap, from my pal Harper over at Harper Honey.
    I was talking with Lindsey about how easy and fun it is to mix geek elements into your everyday fashion, so I figured I’d make a quick post about some of my favorite ‘Casual Cosplay’ outfits.

    So, with ‘casual cosplay,’ a lot of people don’t even realize that they like it, or already do it-

    Thinking about wearing an outfit you saw on tv? Casual Cosplay.

    Don’t want to go all out on designing someone’s outfit, but still want to dress like them? Casual Cosplay.

    Inspired by someone’s personality or fashion style and decide to replicate it? Casual Cosplay.

    Want to follow Disney’s rules for dressing up in their parks? Casual Cosplay.

    Nerd? Casual Cosplay.

    The list goes on an on.

    I consider ‘Casual Cosplay’ to be anything reminiscent of cosplay. If you like an exact outfit from someone from tv or movies; it you want to pretend you are that character in everyday life; if you like to show off your geeky side, and wear fandom inspired outfits. All of this stuff, and more, to me, is casual cosplay.

    I was thinking about some of my favorite characters from tv shows and movies, and which kind of outfits are my favorite.

    For this post, I’ll focus on outfits inspired by a character, since that’s an easy place to start.

    Typically, one of my favorite types for these are Disney Princess outfits done casually. This could be actual outfits from the character trimmed down to be more casual, outfits inspired by their general taste, things like that.

    Here are some examples from the user ‘Juliaann35’ from Polyvore.






    They’re simple, but you get the idea, right?
    You can just use regular clothes to inspire your look to a new level!

    You can also remix the character’s style, using their main elements (like color, texture, clothing item type, etc.) to change up their look!
    Here’s some examples of ‘Hipster Disney Princesses’ that I like.

    Snow White






    Outside of the Disney fandom, here are some other examples!

    Doctor Who:

    Femme Eleventh Doctor


    how to dress like Rose Tyler, a guide

    The Avengers/Marvel Universe:


    Loki by sampoly featuring a moto jacket


    Agent Coulson


    Iron Man


    Captain America




    And, just for fun, some of my favorites: PIZZA PLANET [from the Toy Story Franchise]

    Pizza Planet


    Pizza Planet

    I’ll see you soon, with more!!